All Products

A spring balancer that holds an electric or pneumatic screwdriver over the workstation, for loads of 0.3–2 kg. Cleanroom-grade design for electronics (3C) assembly; height and tension adjustable.

A handheld automatic screw locking machine for M2.0–M5.0 screws up to 18 mm. After each screw is driven, the next one arrives at the bit automatically — place the bit on the hole, press lightly, and the screw is locked.

An 850 mL refill hopper that tops up a screw feeder automatically when its low-level sensor calls for screws, so the feeder needs refilling far less often. For M1.0–M5.0 screws. CE and RoHS.

An air-blow screw feeding machine that sends screws from a 1100 mL roller hopper straight to the screwdriver bit, for M1.0–M6.0 screws up to 35 mm. PLC control with fault alarms. CE and RoHS.

A rotary-disc screw feeder for M1.0–M5.0 screws up to 12 mm, at 60–180 pcs per minute, with jam reverse, fault alarm and a signal output for automatic machines.

A compact automatic screw feeder for M1.0–M5.0 screws up to 10 mm, presenting screws at 60–180 pcs per minute, with an adjustable track, a 0–9999 counter and a jam alarm.

A screw and small-parts counter for M2.0–M5.0 screws up to 20 mm, at 60–180 pcs per minute. Used for fixed-count packing and to make sure no screw is missed during assembly.

A compact benchtop screw counter for M2.0–M4.0 screws up to 10 mm long. Set any count from 0 to 9999; once the set quantity is picked up, it starts the next cycle automatically.

A 60 W brushless electric screwdriver with stepless torque from 2.0 to 18.0 kgf·cm (±4%) and 700–1000 rpm, for continuous driving on medium-sized workpieces.

A 30 W brushless electric screwdriver with stepless torque from 1.0 to 10.0 kgf·cm (±4%) and 1000–1600 rpm, for precision electronics assembly and dust-free workshops.